. Understanding 2025 / 2026 UK Regulations for Commercial Kitchen Extraction Systems
As HVAC ventilation regulatory standards tighten across the UK, commercial kitchens must ensure their extraction systems meet current safety, hygiene and environmental standards.
From airflow performance and fire containment to odour control and grease management, the legal requirements in 2025 demand more than just basic functionality. Full compliance is required for commercial kitchens operating in London. Premises are often compact and heavily used, and keeping extraction systems up to standard is needed to avoid penalties and closure.
New Compliance Pressures for 2025 / 2026
As we move through 2025, commercial kitchen operators face increasing scrutiny over performance, cleanliness and safety. Do you run a restaurant, café or a takeaway in London? Following updated regulatory requirements is a legal obligation.
Outdated extractor fans, inadequate airflow, missing fire safety features and poor maintenance records can lead to fines, forced closure and failed inspections. It is common for many food businesses in London to operate in older premises, where systems were installed years ago.
This post outlines current key ventilation related regulations. Also, common areas of non-compliance, and how Fan Services Ltd helps to bring systems up to standard.
1. Key Regulations That Apply to Commercial Kitchen Ventilation
Several UK regulations directly impact how your extraction system must be installed, maintained and operated. These are the most relevant in 2025:
- DEFRA Guidance (for odour and noise control)
DEFRA sets the tone for minimising odour and noise emissions from commercial kitchens. This applies especially in residential areas. If your system vents near neighbouring properties, it must include filtration and silencing solutions.
- Approved Document F (building regulations)
Part F outlines the minimum ventilation rates required in commercial kitchens. This includes both extraction and fresh air supply. Systems must be capable of maintaining effective airflow to remove heat, smoke and fumes.
- HSE CAIS10 Guidance
The Health and Safety Executive requires employers to provide suitable workplace ventilation. This includes systems that will remove vapours, heat and airborne contaminants during cooking.
- TR19 Grease Cleaning Standard
TR19 defines the minimum cleaning intervals for kitchen extraction ductwork. Failing to follow it increases fire risk and can invalidate insurance. Frequency of cleaning depends on hours of use per day and type of cooking.
- BS 9999 and Regulatory Reform (Fire Safety) Order 2005
These standards govern fire safety provisions, and including the use of fire dampers in ducting that pass through walls and compartments. If your system lacks the correct fire dampers, you may be in breach of fire regulations.
- Workplace Regulations & COSHH
Ventilation must be sufficient to provide clean air and safe working conditions for kitchen staff. Exposure to high heat and poor air quality, can lead to prosecution by environmental health officers (EHOs).
2. Common Compliance Issues in Commercial Kitchens
In practice, we encounter the following non-compliance issues across London food premises:
- Insufficient airflow rates: Many extractor systems no longer meet the minimum standards set in Part F. This is due to worn components, poor design or changes in kitchen layout.
- Missing or incorrectly installed fire dampers: This is a serious safety issue, especially in buildings or premises with more than one tenant - with ducting routed through internal walls.
- Lack of TR19 cleaning records: Grease build up increases fire risk, and it’s a common reason for failed inspections.
- Excessive noise and odour discharge: DEFRA guidelines require systems to minimise impact on the environment. Non-compliant setups often result in complaints from neighbours and landlords.
- Use of non-approved ducting materials: Lightweight or poorly sealed ducting fails fire and hygiene requirements, and may not pass inspection.
Why not ask a professional engineer at Fan Services Ltd to help you to navigate the way forward.
3. How Does Fan Services Ltd Support Compliance?
Fan Services Ltd works with restaurants, cafés, takeaways, pubs, schools, bakeries and catering kitchens across London. We assess, upgrade and certify extraction systems. Our processes focus on making sure that every system we install and maintain, meets all the current legal requirements.
Here’s how we approach compliance:
- Site Assessment
We begin with a full site visit to check your current extraction setup against applicable standards. This includes airflow checks, fan condition, duct routing and component inspections.
- Airflow Testing
We measure extraction and make-up air volumes to determine whether the system meets Part F airflow specifications. When there is a shortfall, we recommend appropriate upgrades.
- Grease Management and TR19 Review
We inspect internal ducting for grease accumulation and check cleaning frequency against TR19 standards. If cleaning is overdue or undocumented, we can arrange a compliant service and we then issue a cleaning certificate.
- Fire Damper Installation and Certification
If your ducting passes through compartment walls or ceilings, fire dampers are likely required. We install tested and approved dampers that meet BS 9999 and we issue documentation for fire safety compliance.
- Noise and Odour Control
Where a ventilation system discharges near to public and residential areas, we assess the need for acoustic silencers or odour filtration to meet DEFRA guidelines.
- Documentation and Certification
Following upgrades and inspections, we provide documentation that you can share with EHOs, landlords, fire officers and insurers to show compliance.
Why Staying Compliant Matters
Keeping your kitchen extraction system up to standard is about more than avoiding fines. It also:
- Prevents unplanned closures during inspections and audits
- Reduces fire risks, protecting your staff and your premises
- Helps secure insurance cover or claims without dispute
- Improves working conditions, which helps with staff retention
- Demonstrates professionalism to landlords, neighbours and local authorities
Regulations are in place to protect people and property. Staying compliant is all part of running a responsible food business.
FAQ - Compliance and Ventilation Standards
Q: How often should TR19 grease cleaning be carried out?
This depends on daily operating hours and cooking methods. As a general guide:
- Light use (2–6 hours/day): every 12 months
- Moderate use (6–12 hours/day): every 6 months
- Heavy use (12–16 hours/day): every 3 months
Q: Are fire dampers mandatory in all kitchens?
Not always. They are required where ducting passes through fire rated walls or ceilings. If you’re unsure, a site assessment can be carried out.
Q: Can Fan Services Ltd provide compliance certification?
Yes. We issue documentation following installations, upgrades and TR19 cleaning that can be submitted to authorities or insurers.
Q: Do these rules apply if the kitchen space is rented?
Yes. Responsibility may be shared between the tenant and the landlord, but compliance is still required. You should confirm who is accountable in your lease.
We Suggest: Stay Compliant, Stay Operational
As regulations evolve, it’s essential to ensure your commercial kitchen ventilation system remains compliant with current UK standards. Ignoring airflow performance, fire safety features, or grease management, puts your business at risk. Read our detailed extraction system engineering guide
Fan Services Ltd helps food businesses across London & Greater London to meet these requirements with professional assessments, certified installations and compliant upgrades. If you need a one-off inspection or a full extraction system overhaul, we’re ready to help.
FAN SERVICES FOR YOUR COMMERCIAL KITCHEN EXTRACTION IN LONDON
We help commercial kitchen establishments including:
Fast Food chains and independents
Restaurants
Pubs
Bakeries
Cafes
Caterers
Industrial
Dark kitchens
Limited companies and self employed
Sports Event providers
How Fan Services Ltd supports commercial kitchen extraction compliance
Commercial kitchen extraction regulations are only one part of the wider compliance picture. System design, canopy performance, ductwork layout, grease management, odour control, noise control, maintenance access and replacement air all affect whether a kitchen extraction system is suitable for commercial use. Fan Services Ltd covers these areas in our commercial kitchen extraction compliance and engineering guide for London.
Fan Services Ltd Provides end to end services:
We have a detailed breakdown of airflow modelling, static pressure calculations and lifecycle cost considerations. If a commercial kitchen extraction system needs upgrading to meet operational or compliance requirements, Fan Services Ltd can advise on commercial kitchen extraction supply and installation across London.

Fan Services London 0203 539 1475
Fan Services Ltd is a specialist for all commercial kitchen dependent businesses in London. Repairing, installing and maintaining commercial extractor fan systems is what we do day in day out. We also provide servicing for all commercial food places such as restaurants and cafes.
Fan Services Ltd is long established and we are based in the City of London in the UK. We will get your kitchen up and running quickly if you are having any problems! ...24/7, we provide services for City of London, Inner London and Outer London.
We will help you by looking at what your needs are, and seeing which solution will fit those needs best. We create, install and maintain commercial kitchen extraction systems to exceptionally high standards.
Our Emergency Call Out Service is available 24 hrs a day 7 days a week. Don't take any short cuts with your kitchen or your livelihood. We understand what is needed and we have a right first time approach to everything we do.
Get in touch we’d love to help. You can also use our contact form – it’s quick and easy to fill out. You can also email info@fanservices.co.uk or call our office in London 0203 5391475 / mobile phone 0759 500 3000 to discuss your requirements. Contact us for a free to see what we can provide for you.








